Publikationen | 2003

Publikationen 2003 / Publications 2003

Publikationen 2003 / publications 2003


Gindl W., Müller U., Teischinger A.: Transverse compression strength and fracture of spruce wood modified by melamine-formaldehyde impregnation of cell walls. Wood and Fibre Science 2003, 35 (2), p. 239-246

Gindl W., Zargar-Yaghubi F., Wimmer R.: Impregnation of softwood with melamine-formaldehyde resin. Biosource Technology 2003, 87, p. 325-330

Mais U., Sixta H.: Characterization of alkali-soluble hemicelluloses of hardwood dissolving pulps. ACS book on Xylans, Mannans and other Hemicelluloses 2003, in press

Müller U., Rätzsch M., Schwanninger M., Steiner M., Zöbl H.: Yellowing and IR-changes of spruce wood as result of UV-irradiation. Journal of Photochemistry and Photobiology 2003, 69, p. 97-105

Röder T., Möslinger R., Mais U., Morgenstern B., Glatter O.: Charakterisierung der Lösungsstruktur technisch relevanter Celluloselösungen. Das Papier 2003, in press

Sixta, H., Promberger, A., Gradinger, C., Messner, K.: Influence of beech wood quality on Sulfite dissolving pulp manufacture. Part 1: Influence of log storage on pulping and bleaching Holzforschung 2003, in press

Teischinger A.: Des materiaux innovants et sur mesure a base de bois. l`architecture d`aujourd`hui, 2003, 347, p. 42 - 45

Wimmer R., Teischinger A.: Ideengeber: innovative Materialien. Neue Wege der Holzforschung. Holz - Bildung – Forschung 2003, 55 (1), p. 4

Wimmer R., Teischinger A.: Vom Sperrholz zum Biopolymer - Trend bei Holz und Naturfaserwerkstoffen. Holz - Bildung – Forschung 2003, 55 (4), p. 4-6

Wolfinger M., Sixta H.: Modelling of the acid sulfite pulping process Part I: Problem definition and theoretical approach for a solution with main focus on the recovery system of cooking chemicals. Lenzinger Berichte 2003, submitted

Wolfinger M., Steindl M.: Online Raman Monitoring of the Phase Transition of Magnesium Sulphite Hydrate. Chemical Engineering and Processing 2003, submitted

 

Fachvorträge und Posterpräsentationen 2003 / papers and poster presentations 2003:



Bergmann I.: Extrudierbare Holz-Melaminharz Composites. Holzforschungstage Graz, Österreich, 2003, Vortrag

Eckmann R., Dunky M.: Fracture energy determination based on fracture cleavage testing of adhesively bonded spruce. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

Eckmann R., Dunky M.: Evaluation of the mechanical influence on adherend surfaces of spruce. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

Eder A.: Markets for Wood Plastic Composites. Wood fibre Polymer Composites Symposium, Bordeaux, Frankreich 2003, Vortrag

Eder A.: Market chances for products of modified wood in german-speaking markets. 1st European Conference on Wood Modification (ECWM), Ghent, Belgien 2003, Vortrag

Eder A.: Market opportunities for wood-plastic composites, Profiles 2003, Düsseldorf, Deutschland 2003, Vortrag

Eder A., Schwarzbauer P.: Holz/Kunststoff Verbundwerkstoffe - Marktvolumen und Marktchancen. 4. Internationales Seminar für die Holzindustrie 2003, St. Gallen, Schweiz, 2003, Vortrag

Fackler K., Schwanninger M., Hinterstoisser B., Messner K.: Bio-Modification of Spruce Wood by Ceriporiopsis subvermispora: Comparison of the Effect of Three Different Strains. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Posterpräsentation

Ganz A., Hutter T., Kessler R.W.: Morphological characterisation of differently refined fibres – the raw material for the production of hardboards in the wet process. Wood Fibre Polymer Composites Symposium, Bordeaux, Frankreich, 2003, Posterpräsentation

Gradinger C., Messner K.: Fungal deterioration of wood. Kolloquium an der Universiät Laibach, Laibach, Slowenien, 2003, Vortrag

Gradinger C., Messner K., Promberger A., Sixta H.: Characterization and influence of fungal growth on beech wood used for the production of Dissolving Pulp. 12th International Symposium on Wood and Pulping Chemistry, 2003, Posterpräsentation

Gsöls I., Haider A., Rätzsch M., Ladner C.: Effect of melamine resin impregnation on dimensional stability, moisture sorption and fungal resistance of Norway spruce. European Students Conference on Physical Organic and Polymer, Chemistry, Wien, Österreich, 2003, Posterpräsentation

Gsöls I., Steiner M., Müller U., Rätzsch M.: Interaction between wood and melamine resins: Effect on dimensional stability, mechanical properties and fungi attack. 1st European Conference on Wood Modification, Ghent, Belgien 2003, Vortrag

Hansmann C., Gindl W., Zargar-Yaghubi F., Wimmer R.: Melamine modification of acetylated spruce wood. European Conference for Wood Modification, Gent, Belgien, 2003, Posterpräsentation

Hansmann, C., Gindl, W., Zargar-Yaghubi, F., Wimmer, R.: Melamine modification of acetylated Spruce wood. 1st European Conference for Wood Modification, Gent, Belgien, 2003, Vortrag

Hinterstoisser B., Schwanninger M., Stefke B., Stingl R., Patzelt M.: Surface Analyses of Chemically and Thermally Modified Wood by FT-NIR. 1st European Conference on Wood Modification, Ghent, Belgium 2003, Posterpräsentation

Hutter T., Kessler R.W., Zander J., Ganz A.: Characterisation of Modern Wet-Process Fibreboard Production using Experimental Design. 7th European Panel Products Symposium, Llandudno, UK, 2003, Vortrag

Hutter T., Kessler R.W., Zikulnig-Rusch E.: Knowledge-based Production of Wet-processed Hardboard. International Conference of Chemical Technology of Wood, Pulp and Paper, Bratislava, Slowakei, 2003, Posterpräsentation

Hutter T., Kessler R.W., Zikulnig-Rusch E.: Wissensbasierte Produktion verformbarer Faserplatten im Nassverfahren. 4. International Symposium Werkstoffe aus nachwachsenden Rohstoffen, Erfurt, Deutschland, 2003, Posterpräsentation

Mais U., Sixta H.: Investigation on hemicellulose fractions extracted from different wood and pulp typs. Gordon Conference on the Chemistry of Polysaccharides, Il Ciocco Barga, Italien, 2003, Posterpräsentation

Mais U., Sixta H.: Fragmentation kinetics of beech wood derived hemicelluloses. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Posterpräsentation

Mijatovic J., Dunky M., Kantner W.: Curing behaviour of MUF resins. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

Obermaier A., Sixta H., Weber H.K., Milacher W., Promberger A., Müller N.: Prehydrolysis of selected Model Compounds and Milled Wood Lignin. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Posterpräsentation

Promberger A., Sixta H., Gradinger C., Messner K.: Effects of Storage Conditions on beech wood properties and their impact on the production of Mg-Sulfite Dissolving Pulp. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Posterpräsentation

Rosca I., Gsoels I., Rätzsch M., Schmidt H.: Short-duration impregnation of wood with melamine resins. European Students Conference on Physical Organic and Polymer Chemistry, Wien, Österreich, 2003, Posterpräsentation

Rosca I., Gsöls I., Rätzsch M., Schmidt H.: Improvement of wood impregnation by ammonia treatment. 1st European Conference on Wood Modification, Ghent, Belgien, 2003, Posterpräsentation

Schlesinger R., Milacher W., Götzinger G., Net M., Friedl A., Harasek M.: Determination of Molecular Mass Dependent Retention of Caustic Hemicellulose Solution by Nanofiltration. ECCE-4, 4th European Congress of Chemical Engineering, Granada, Spanien, 2003, Vortrag

Schwanninger, M., Gierlinger, N., Hanger, H., Hansmann, C., Hinterstoisser, B., Wimmer, R.: Characterization of thermally treated beech wood by UV-VIS microspectrophotometry, FT-MIR and FT-NIR spectroscopy. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Vortrag

Shadurka V., Binder W.H., Dunky M., Kantner W.: Reaction Pathways of Blocked Isocyanates in UF-Resins. European Students Conference on Physical Organic and Polymer Chemistry, Wien, Österreich, 2003, Vortrag

Shadurka V., Binder W.H., Dunky M., Kantner W.: Formation of an Interpenetrating Network by Crosslinking of UF-Resins with Blocked Isocyanates. 6th Austrian Polymer Meeting, Wien, Österreich, 2003, Vortrag

Shadurka V., Binder W.H., Dunky M., Kantner W.: Blocked isocyanates in UF resins: reaction pathways and crosslinking. 7th European Panel Products Symposium, Llandudno, UK, 2003, Vortrag

Shadurka V., Binder W.H., Dunky M., Kantner W.: IR-spectroscopic investigations of blocked isocyanates in UF resins. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

Stefke B., Dunky M., Kantner W.: Comparison of hardener systems for aminoplastic resins. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

Steindl M., Sixta H., Friedl A.: Mass balance of a MgO-SO2 recovery system - measurement and modelling. Tappi-Fall Conference, Chicago, USA, 2003, Posterpräsentation

Teischinger A.: Modifiziertes Holz. Fenster-Türen-Treff, Bad Tatzmannsdorf, Österreich, 2003, Vortrag

Teischinger A.: Maßgeschneiderte Holzwerkstoffe für Leichtbau- und Verbundbauweisen. 11. Holztechnologisches Kolloquium der TU Dresden, Dresden, Deutschland, 2003, Vortrag

Teischinger A.: Holzwege in die Zukunft. 5 Jahre PROHOLZ Tirol, Innsbruck, Österreich, 2003, Vortrag

Teischinger A.: Wood Plastic Composites. Starke Holzprodukte der Zukunft. Zeltweg, Österreich, 2003, Vortrag

Teischinger A., Hinterstoisser B.: Holzchemische Fragestellungen entlang der Prozesskette Holz. Kolloquium-Gesellschaft österreichischer Chemiker, Linz, Österreich, 2003, Vortrag

Teischinger A., Höglinger O.: Maßgeschneiderte Holzwerkstoffe. Bayern innovativ-Symposium Holz Innovativ, Rosenheim, Deutschland, 2003, Vortrag

Teischinger A., Sixta H.: Optimierung und Neu-Entwicklung von Produkten auf Holzbasis. Bayern innovativ-Symposium Technologien biogener Rohstoffe, Straubing, Deutschland, 2003, Vortrag

Teischinger A., Wimmer R.: Neue Werkstoffe aus Holz. 34. Innovatins- und Technologiekolloquium-nachhaltig entscheiden, Wien, Österreich, 2003, Vortrag

Weichselberger G., Knaus S., Gruber H., Hansmann C., Schwanninger M.: Trimethylsilylated Wood - Investigation of Hydrolytic Resistance, Silicon Distribution and Mechanical Properties. 1st European Conference for Wood Modification, Gent, Belgien, 2003, Posterpräsentation

Weichselberger G., Knaus S., Gruber H., Hansmann Ch., Schwanninger M.: Chemical Modification of Wood: Effects on surface wettability and mechanical strength. 12th International Symposium on Wood and Pulping Chemistry, Madison, USA, 2003, Posterpräsentation

Wimmer R., Gindl W., Müller U., Teischinger A.: Impregnation and mechanical properties of spruce cell-walls by means of melamine-formaldehyde resin. IUFRO-All Division 5 Conference, Forest products research providing for sustainable choices, Rotorua, Neuseeland, 2003, Vortrag

Wolfinger M., Steindl M., Yaldez R., Mühlbacher R., Sixta H.: Modelling - a tool to improve the efficiency of magnesium bisulfite recovery. Tappi-Fall Conference, Chicago, USA, 2003, Posterpräsentation

Zikulnig-Rusch E., Kandelbauer A., Kessler R.W., Wuzella G.: Mounting Wet and Dry Processed Fibreboards with Flame Retardancy. 7th European Panel Products Symposium, Llandudno, UK, 2003, Posterpräsentation

 

Diplomarbeiten / diploma theses:



Bauer Andreas: The possible contribution of the Austrian Forest sector to climate change policies and implications of the Kyoto-Protocol. 2003, abgeschlossen

Bauer Ursula: Weltweite Marktübersicht über Platten im Innenausbau. 2003, begonnen

Bernis Anne: Filtration von Polysacchariden. 2003, begonnen

Bruderhofer Martin: Marktanalysen von Holz-Fassadensystemen. 2001, abgeschlossen

Eder Michaela: Oberflächencharakterisierung von acetyliertem Holz. 2003, abgeschlossen

Groiss Yvonne: Hemicellulosen, 2003, begonnen

Kuncinger Thomas: Detektionssysteme für Adsorption von Cellobiose Dehydrogenase an Cellulosesubstrate. 2002, begonnen

Lierzer Thomas: Weltweite Marktübersicht über Holz im konstruktiven Bereich. 2002, abgeschlossen

Moshammer Edith: Reaktionen von Ligninmodellen unter Bedingungen der sauren Sulfitkochung im Vergleich mit den realen Produkten (Lignosulfonaten). 2003, begonnen

Oberhammer Raimund: Weltw. Marktübersicht über Möbel aus Holz. 2002, abgeschlossen

Petrak Sonja: Untersuchungen zur Reaktion zwischen aminoplastischen Harzen und geblockten Isocyanaten während der Aushärtung. 2003, begonnen

Pühringer Rainer: Untersuchungen zur Plastifizierung von Holz. 2002, abgeschlossen

Schild Dominik: Effekt der Vorbehandlung von Holz mit holzabbauenden Pilzen auf dessen physikalische Eigenschaften. 2003, abgeschlosssen

Schirk Christian: Physikalische und chemische Aktivierung der Inhaltsstoffe des Holzes während des thermomechanischen Aufschlusses zur Herstellung von Hartfaserplatten nach dem Naßverfahren. 2001, abgeschlossen

Schöggl Karl: Berechnung und Vergleich prozessrelevanter Stoffdaten des Systems MgO-SO2-H2O und deren Implementierung im Prozesssimulationsprogramm Aspen plus. 2003, begonnen

Stallinger Stefan: Chemische Modifizierung von Holz. 2002, abgeschlossen

Stürzenbecher Reinhard: Modellierung der Eigenschaften von Naturfaserverbundwerkstoffen mittels Mischungsdesign. 2003, begonnen

Sykora Karel: Weltweite Marktübersicht über Platten aus Holz. 2003, abgeschlossen

Ters Thomas: Untersuchungen zur enzymatischen Modifikation von Holz. 2003, begonnen

Weilharter Herold: Märkte für Fenster aus modifiziertem Holz. 2001, abgeschlossen

Wulz Peter: Biopulping zur Vorbehandlung von Hackschnitzel für die Faserplattenherstellung. 2002, begonnen 

 

 

Dissertationen 2004 / dissertations 2004:



Bergmann Irmgard: Extrudierbare Holz/Melamin-Verbundwerkstoffe. 2001, begonnen

Eckmann Rene: Einfluß der Klebefuge auf die Qualität von Holzwerkstoffen. 2002, begonnen

Eder Asta: Märkte und Marktpotenzial für innovative Holzwerkstoffe - aus der Sicht von gewerblich/industriellen Weiterverarbeitern. 2003, begonnen

Fuljetic Antonio: Marktchancen und Marktpotenzial für ein Fertighaus aus OSB 8000. 2003, begonnen

Haider Andreas: Extrudierbare Holz-Melaminharz-Verbundwerkstoffe. 2001, begonnen

Hansmann Christian: Chemical modification of solid wood. 2002, begonnen

Hutter Thomas: Neue Technologien in der Faserplattenindustrie. 2002, begonnen

Promberger Andrea: Influence of storage conditions of beech wood on pulping processability and final pulp properties. 2001, begonnen

Rosca Sanda Irina: Holzplastifizierung mit Ammoniak. 2001, begonnen

Roth Michael: Flammfeste Holz-Melaminharz-Verbundwerkstoffe. 2002, begonnen

Schlesinger Robert: Entwicklung eines betriebstauglichen und wirtschaftlichen Membranverfahrens zur Abtrennung von Hemicellulose aus Natronlauge. 2002, begonnen

Shadurka Victar: Reaktionswege geblockter Isocyanate in Harnstoff-Formaldehyd-Harzen. 2001, begonnen

Steindl Werner: Modellierung von Venturiwäschern zur Herstellung einer Mg-Hydrogensulfitlösung (Rohsäure für den Sulfitaufschluß). 2001, begonnen

Weichslberger Günther: Chemische Modifizierung von Festholz. 2001, begonnen

Weinfurter Stefan: Endkonsumentenbefragung: Produkte aus extrudierbarem Holz, modifiziertem Massivholz und Holzplatten. 2003, begonnen

Zikulnig-Rusch Edith Martha: Höherwertige flammhemmende Holzwerkstoffe. 2001, begonnen